Areas to Apply

MolyFusion Application areas, 2004

Not all application areas are listed here: some are left out on purpose, the actual instructions may give more examples, being newer, but most interesting would be new application areas as in new design: just like when a new integrated circuit comes along: new designs pop up around it. At the bottom of the page are links to example application areas, in place as of 2004.

Cost Savings

Consumers

Though this is a professional product, it carries a money back warranty including shipping both ways, (US and Canada only), no other warranty is expressed or implied, since it is so strong. This is uncut, full strength, as manufactured technology. It is amazingly non-toxic and very long shelf life (years, as the chemistry is stable.) The warranty is 90 days only, and subject to change without notice. It is a professional strength item.

Drilling, cutting tools, endmills, routers, saw blades, hack saw blades.

Does Wonders for HSS, cobalt coated, Titanium Nitride coated (TiN), and much more: Smoother, Longer Lasting, Less Sticking, Less Deburring, Neater. Does not retard an active lubricant. The advantage for drilling is a sharp edge only stays sharp when the rest of the bit is friction-free so it doesn't generate its own heat in the work. Especially in soft materials that "gall" on metal to metal contact: Stainless steel, Titanium, and aluminum. Also heat reflectivity/refractivity is important to prevent transfer of heat from hot work to the tool.

Electronics

New Area, while it has many, many applications, it is unused here to date. Examples=Tantalum

Finished Goods

For example on Finished Blade and cutting materials where you have access to the steel itself. (See Metals below.)

Firearms

Lest you think it is just for firearms, remember it is metal treatment, and therefore has universal appeal for mountain bikes, bicycles, skates, and all manner of epuipment related and unrelated to firearms. Most testimonials are for firearms, but the reason for the categories is to show other uses.

In the bore of Hand-guns: semi-autos, autos, revolvers, black powder.

In the bore and other wear areas of long-guns: rifles, semi-autos, autos, black powder, long range, bench rest

It is resilient and has been reported to work as a great base to another product for this use, when used per directions: Sweetshooter.

Types: Action, Military, Sniper, Carry, IPSC, Practical, Bench rest, Full Bore

All sliding and moving parts where much less inherent friction and additional strength, longevity, resistance to wear and resistance to corrossion  is desired (and not too much.)

It is best to reapply it at or before it wears out, to greatly extend the life of the surface working surface, unless you have treated or finished with something it might not go through.

Again is reported by the people who count: our customers to be a great base for another multi-purpose product in protection and lubrication, etc: Sweetshooter.

Foundry

Handles typical high heat through 2200 degrees F without allowing galling and spot welding. Will not peel or flake off. Did this in practice in Australia. Example: Anti-sieze and Anti-stick treatment of metal devices.

Industrial

This is a good area, and its benefits are huge.

It works at 1700 degrees F as a sacrificial surface for agressive cutting dies.

Gunsmithing / Gun Finishing

Customers Love what it does in the bore, slide, action, super trigger job, etc. in the hands of a trained professional, who prepares the surface metal first, and follows the directions exactly. Pre-borescope the the metal in question is best to make sure it is completely clean and no serious three-dimensional surface defects.

Art London said his customers were bugging him for it. And it works. "Doc" Lizenby swears by it. For the latest, please check out testimonials.

Gun Building / Custom

While Ken Howell was the first to publish the merits of this, Brad Stair was the first producer/ innovator in this area, and has been using it for aproximately 18 months now, (20 months ago) with terrific results, he and his cutomers say, judging from what the finished results were. Another proffesional gunsmith/shooter/metalurgist/certified profesional materials engineer is using it and performing studies with it for more than two years, some of which is coming to fruition.

Heavy Machinery

Well, a natural fit here. See above with the carbide tool dies cutting hardened steel at 1700 degrees F

Machining

HSS, Low Carbon, High Carbon, Hardened, UnHardened, Milled surfaces, expensive non-carbide and carbide cutter steels, even, it seems.

Makes a great base for other lubricants, once parts or tool steel or tooled steel is treated. See Metals below.

Manufacturing

Foundry, Metal Cutting, and Firearm usage are the primary applications developed to date. More will be on-line soon.

Metals

Alloy

Carbon

Cobalt

Chromium

Iron

Iron Powder

Magnesium

Not pure copper

Not pure Titanium

Carbide?

Not pressed metals

Stainless Steel

Steel

Tantalum

Metal Finishing, not as a colorant.

A super slippery non-coloring finish. .00005" thick. etc. (Need we say more?) Aprox $3.00 per square foot, reacted coverage at the 30mL Retail. More expensive than paint, but no equipment is required. 1 Oz. does many 30 cal and under guns, one time each in the bore only, for example.

Motorcycles

Moving parts and as a treatment finish for hardware. If you want a finish, we are coming out with a product to do that.

Research

New technology a phycisist can appreciate, but doesn't require a physicist, tribolgist, scientist, or evan an engineer to operate. ALL brand new patented technology in the bottle ready for use!

Parts

Races, Raceways, lead screws, rails, Moving Parts, Sliding Parts, Ball Bearings, and much more. Will not interfere with normal tolerances or the application of top or in between oil, lubricants, and grease, preservatives. Thousands of applications possible in this area, it is so huge.

Science

New Technology

Shooting

It is being used here, though to a limited extent so far. Super benefits, fairly unknown. All gun shooting: smokeless long distance, black powder long distance, Cowboy Single Action, IPSC, Practical Defense Practical Defense shooting, Police Sniping, Shotgunning, and much more.

Students and Hobyists

Easy to Use. A full kit with full directions, and full support

Sporting

This are many uses, including go-kart use, mountain bikes, racing bikes, winter sports like skating, fishing, 2-cycle engine use, (mechanical portions of sporting) reels, and more. Research is happening in this area, since it is related.

This is an ongoing work and body of study.

-2-17-2004